Insert the Setup CD-ROM into the computer’s CD-ROM drive. The Setup CD-ROM should run automatically. If it does not, click the Start button and choose Run. In the box that appears, enter D:\setupWizard.exe (if “D” is the letter of your CD-ROM drive).

When you see the Welcome screen, Figure B, click Setup Wizard to continue.

The screen in Figure C will appear while the Setup Wizard is searching for the USB Print-Server.

After the Setup Wizard has found the USB PrintServer, the screen in Figure D will appear. If this is the first time you have run the Setup Wizard, make sure that List only new (unconfigured) Print Servers is selected and your Print Server is listed by its default server name. If you have previously configured the Print Server, select List all compatible Print Servers. Click Next to continue.

The Password screen, Figure E, will appear next. Enter the default password admin in the field. Click Enter.

The Basic Settings screen, shown in Figure F, will appear. If you want to change the Device Name or Domain Name, enter the Device Name and Domain Name in the respective fields. Click Next.

The IP Settings screen, Figure G, appears next. If your network uses a router with a DHCP Internet Protocol setting that automatically assigns an IP address, select Automatically obtain an IP address (DHCP). If your network uses a static IP address, select Set IP configuration manually, and enter the IP Address, Subnet Mask, and Gateway in the fields provided. Click Next.

The next screen that appears is the Set PrintServer’s Password screen, shown in Figure H. If you want to change your password, enter your current password in the Current Password screen. Enter the new password in the New Password field, then enter it again in the Verify Password field. Click Next.

The Confirmation screen appears next. See Figure I. Your old and new settings will be displayed. If you want to make a change, click No. If the settings are correct and you want to save the changes, click Yes.

The Congratulations screen, shown in Figure J, will appear when the setup is complete.